Butterflies bookmark

Butterflies on a bookmark, created in HueForge using 5 colours. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 59.55x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments Used: (* = Owned) #000000 * PLA BambuLab Basic Black Transmission Distance: 0.6 #55007f * PLA Eureka Violet Purple Transmission Distance: 4.7 #ffffff * PLA BambuLab Basic Jade White Transmission Distance: 5 #00ae42 * PLA BambuLab Basic BambuLab Green Transmission Distance: 2 #ffff00 * PLA Canadian Made Yellow Transmission Distance: 2.5 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Violet Purple At layer #8 (0.72mm) swap to Jade White At layer #9 (0.8mm) swap to BambuLab Green At layer #11 (0.96mm) swap to Yellow At layer #19 (1.6mm) swap to Jade White At layer