Butterfly Clamp

My first attempt at screen printing. I needed some clamps like this.
Depending on the frame you're using, you may need to print the "flex" parts (blue in photo)
from TPU and glue them to the clamp. While this is optional it helps keep the clamp from slipping off the frame.

The clamp looks gray in the pictures. I wanted it to have a metal look.
I used Dragons Metallic PLA - Pure Shine Silver from Makegeeks
https://www.makergeeks.com/collections/pla-filament-1-75mm/products/dragons-metallic-pla-pure-shine-silver-175mm-1kg

Other parts needed

Hinge Pin
M3 50mm screw
M3 nut (nyloc)

Clamp
M6 x 1.0 x 50mm bolt
M6 x 1.0 nut