C-3P0 Concept Art

Project: C-3PO Concept Art.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 240x149.79mm in sizeYou may print at higher layer heights below the Min Depth of 0.8mmThe Max Depth is 3.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Gray At layer #18 (1.52mm) swap to Jade White for the rest.