Thingiverse
C-Clip pliers
di dspirov
1
Download
5
Likes
0
Makes
Pliers for removing C clips.
Printed in PETG with 5 perimeters and 50% infill.
Hardware needed: M5 bolt and nylock nut and two pieces of 2mm steel rod (I used an old bicycle spoke). The holes for the rods are a tight tolerance and may have to be drilled out and the pins hammered in.
Printed in PETG with 5 perimeters and 50% infill.
Hardware needed: M5 bolt and nylock nut and two pieces of 2mm steel rod (I used an old bicycle spoke). The holes for the rods are a tight tolerance and may have to be drilled out and the pins hammered in.
dspirov pubblica anche su
1 modelli aggiuntivi su altre 1 piattaforme
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!