C51 6 Bit Digital Clock

A simple case for a hobby clock kit. The kit I used is called a C51 6 Bits Digital Electronic Clock Production suite on Ebay. There is an included bezel that could either be glued on or left off depending on preference. If the two case halves are not going together easily the small, upper part of the pegs that go through the PCB can just be snipped off as they really aren't necessary to hold the PCB in. I included a DXF of the display components of the clock kit if anyone needs it to do their own case. (3) buttons need to be printed individually. If you want to use the speaker for the alarm there is a small recess to mark the speaker hole that can be drilled out. I don't use it so I didn't drill it.

*edit 04/30/18*
The buttons caused some flex in the circuit board when pressed. Not good in the long term for the circuit board or switches. Back Shell V2 adds a couple supports under the switches to back up the board.