Thingiverse

Cable Management Tray

by johnnymast

27 Downloads

9 Likes

0 Makes

Manage your USB cables with this "Cable management Tray", you can clip it on your desk (designed for a desk height of 25.30mm height 0.99 inches).

Make sure you print this tray with supports on the desk clamp part (or it will not print correctly)

Printing times:

normal: 2 hours 31 min
high: 5 hours 9 min

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

2 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Cable Management Tray need supports when printing?

Yes, Cable Management Tray will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Cable Management Tray?

According to the design notes, Cable Management Tray takes approximately 2 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Cable Management Tray available in?

Cable Management Tray is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Cable Management Tray free to download?

Yes, Cable Management Tray is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Cable Management Tray

Add to Collection