cablecam mini

mini cablecam, wifi controlled. the transmitter is a M5stick plus2. tilting it will vary the speed of the cablecam. suitable for insta 360. the receiver is an esp8266. the motors are 2 micro motors of the N30 series 1000rpm 6V.
you need a 638/5-2z bearing.
The towing pulleys have a TPU part inside which helps prevent the wire from slipping.
code:
https://github.com/pragamichele/cablecam-M5Stick
To improve the transmitter range, it is recommended to add an external antenna

N1 esp8266
N2 N30 micromotors 1000 rpm 6V
N1 driver L298N
N1 bearing 638/5_2z
N1 step up 5V + lipo carge (It takes the power from a lipo and brings it to 5V, to power the ESP, it also charges the lipo if connected to USB C.

N1 step up 9V (motor power supply)
N1 switch
A piece of aluminum 15x65x2mm
N1 M4x30 screw with nut
N1 M4x20 screw with nut
N1 spring
N3 M3x15 screw with nut
N4 M2x10 screw
A 3mm rope 30m long

https://youtu.be/Bo3VNJDM90s?si=HZ42HoZmgxAf2VRl
...