Caboose's Primitive Quadcopter

Intro
-----

The goal of this project was to create a small, modular, printable quadcopter body. I aimed to keep this as simple as possible.

The quadcopter is made up of a core, and 4 arms. All arms are identical.
___

Parts List
------------

- Turnigy 2900KV Brushless Outrunner OR Turnigy Park480 Brushless Outrunner 1320kv
- Turnigy Plush 6A ESCs or HobbyKing 6A ESC 0.5A UBEC
- 5030 Props
- 5030R Props
- 1000mAh 2S NanoTech LiPo (or similar)
- KK2 Flight Controller
- 8 x 12mm or 15mm M3 Bolts
- 4 x 40mm M3 Bolts
- 10 x M3 Nuts


Read assembly instructions for more details.
___

Change List
-----
v2: Spacing change, removal of extra weight. Landing strut available if you don't want to use M3 screws
v1: Initial release