Thingiverse
Caddy Organiser
von jhale716
8
Downloads
4
Likes
0
Makes
Having the desire to have things together and tidy, this was pulled together for indoor plant care.
The model is 5cm (2in) thick for two reasons:
1. To provide the boxed areas for things; and
2. To cover the pH bottle so the test colours don't fade if this is left in the sun.
On the Ender 3, this is about a 20-hour print. Invert on your glass bed to have the pretty smooth side up; you will need support this way.
My machine has Marlin with arc capability and is printed with Arc-Welder in Cura enabled.
If you use the 50/50 models, check your slicing, as they sometimes kick out errors.
The model is 5cm (2in) thick for two reasons:
1. To provide the boxed areas for things; and
2. To cover the pH bottle so the test colours don't fade if this is left in the sun.
On the Ender 3, this is about a 20-hour print. Invert on your glass bed to have the pretty smooth side up; you will need support this way.
My machine has Marlin with arc capability and is printed with Arc-Welder in Cura enabled.
If you use the 50/50 models, check your slicing, as they sometimes kick out errors.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
