MakerWorld
Earrings
Ver Modelo
Caduceus Earrings
4
Descargas
6
Likes
1
Makes
A pair of earrings inspired by the caduceus symbol.Bill of MaterialsYou will need:Earring hooksEye pins for earrings (0.6 mm diameter, 16 mm length)A very small amount of glue can be useful to ensure the eye pins stay firmly in place.InstructionsEach earring has a small hole at the top. Simply insert an eye pin through the hole, then attach the hook to the eye pin.If needed, you can apply a tiny drop of glue to the eye pin before inserting it to secure it more effectively.Printing recommandationsUse a 0.2 mm or 0.4 mm nozzle with the Arachne wall generator enabled in your slicer for the best results.Print on a smooth build plate (smooth PEI or similar).If you experience adhesion issues, make sure your build plate is thoroughly cleaned.DesignFont Awesome icons were used as the basis for the caduceus symbol.
Rauks también publica en
33 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
