Thingiverse
Caged Ball Bearing
door blecheimer
218
Downloads
187
Likes
2
Makes
Disclaimer:
Due to the recent incidents (things appearing on ebay) I just want to make something very clear:
I do not allow any commercial use of my STL-files, my designs and my photos!
Description:
A real ball bearing needs a cage to separate the balls. So I changed my first ball bearing ( http://www.thingiverse.com/thing:56298 ) to 8 balls and added a cage.
I was a little suprised that the cage really improves the function of the bearing.
You can see the difference in this video:
http://www.youtube.com/watch?v=CCsoIQ4pXQ4
If you want to print this bearing you will need a well calibrated printer. Use a layer hight of 0.1mm. After printing all parts (and the cage in particular) must be deburred perfectly.
Due to the recent incidents (things appearing on ebay) I just want to make something very clear:
I do not allow any commercial use of my STL-files, my designs and my photos!
Description:
A real ball bearing needs a cage to separate the balls. So I changed my first ball bearing ( http://www.thingiverse.com/thing:56298 ) to 8 balls and added a cage.
I was a little suprised that the cage really improves the function of the bearing.
You can see the difference in this video:
http://www.youtube.com/watch?v=CCsoIQ4pXQ4
If you want to print this bearing you will need a well calibrated printer. Use a layer hight of 0.1mm. After printing all parts (and the cage in particular) must be deburred perfectly.
blecheimer publiceert ook op
235 extra modellen op 3 andere platforms
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
