Thingiverse

Calibration Castle

von 3dprintbeginnercom

17 Downloads

12 Likes

0 Makes

The Calibration Castle tests the following:

Extrusion quality
Bridging
Overhangs
Retraction
Accuracy
Cooling performance

It's recommended to print the model at 0.15 mm layer height and only add support on the left side (the support test feature)

Before printing, you should calibrate your extruder steps and flow rate.

https://3dprintbeginner.com/extruder-calibration-guide/

https://3dprintbeginner.com/flow-rate-calibration/

calibration calibration castle calibration cube printer calibration retraction test Support test calibration calibration castle calibration cube printer calibration retraction test Support test

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Warum?

0.15mm Schichten

Einteilig

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker