Thingiverse
Calibration Cube 20mm
von Skoopsy
3
Downloads
2
Likes
0
Makes
A really quick calibration cube for calibration of x,z,y steps/mm and overflow/filament extrusion issues.
Cube Dimensions:
Width = 20mm
Depth = 20mm
Height = 20mm
Wall Thickness = 0.8mm
This cube will work with a 0.4mm Nozzle.
Adjust step/mm if x,y, or z dimension is off by quite a bit.
Adjust overflow until wall thickness is 0.8mm. (make sure E-steps is calibrated first)
Cube Dimensions:
Width = 20mm
Depth = 20mm
Height = 20mm
Wall Thickness = 0.8mm
This cube will work with a 0.4mm Nozzle.
Adjust step/mm if x,y, or z dimension is off by quite a bit.
Adjust overflow until wall thickness is 0.8mm. (make sure E-steps is calibrated first)
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
