Calibration cube (for adehesion / temperature)

Use about 0,5G of plastic
Print time: 3 min
Need a working printer
Need infil, works fine with 20% and fast honeycomb
Size: 10x10x5mm, hollow center with 6x6x3

It works testing a adehesion test, done by the Z axis, add one in each corner of the bed
(please keep in mind that kapton tape, hairspray and all those thing wont work if your nozze is too high from the bed, with this test you can see if it is ok,

-How to use:
-----------
First of all, make sure the nozzle is ALMOST touching the bed, (use a paper under it, if it can move, not too hard, but not free, its perfect),
-MAKE SURE ALL THE CORNERS ARE LEVELED! and you have something flat on the top (like a glass or metal!, pcb is NOT flat!)
-add one at each corner of the bed
-Print them with 0,2 layer high - noozle of 0,4 (of course can be printed with others)

Configuring based on the result:
-----------

CAME OUT TOO EASY - DID NOT STICK ON THE BED
-If it did not "glued" on the bed You need to bring your Z endst