Thingiverse
Calibration Tower
por ah1102
9
Descargas
9
Likes
0
Makes
The test is a tower with a level height of 10 mm and a wall thickness equal to the extrusion width for a nozzle of 0.4 mm.
To change the layer temperature in PrusaSlicer, go to PRINTER SETTINGS - USER G-CODE - G-CODE, BEFORE LAYER CHANGE by adding a line of code with a comment:
;decrease 5, degrees every 10mm, with 0.0mm intro
M104 S{250 - (5 * int(((layer_z - 0.0)/ 10)))}
Based on the publication https://www.prusaprinters.org/prints/38895-temp-tower-prusaslicer-02mm-layer-petg
To change the layer temperature in PrusaSlicer, go to PRINTER SETTINGS - USER G-CODE - G-CODE, BEFORE LAYER CHANGE by adding a line of code with a comment:
;decrease 5, degrees every 10mm, with 0.0mm intro
M104 S{250 - (5 * int(((layer_z - 0.0)/ 10)))}
Based on the publication https://www.prusaprinters.org/prints/38895-temp-tower-prusaslicer-02mm-layer-petg
ah1102 también publica en
5 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!