Slicer Discord
Caliper Cradle – 3D-Druckmodell von MakerWorld MakerWorld
3D Printer Accessories

Caliper Cradle

7 Downloads
4 Likes
5 Makes
Zum Modell
Description This caliper mount uses minimalist arms to create a floating effect, use this mount to organize your tools in a sleek and stylish way. in just a singular part create a beautiful organization in under an hour of printing. Instructionsfirst choose between screw mount or adhesive mounting and pick the appropriate model for your use.you can either use double sided tape or blu tack for the adhesive or use 3mm wide appropriately sized length.Place the calipers in the mount and line up with the desired angle, remove the calipers and either mark the screw points or apply adhesive.Sit back and admire your new “Caliper Cradle”. Print settings Layer hight: 0.16mm supports: NO Nozzle: 0.4mm
Kategorie
3D Printer Accessories
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
aufwändige Nachbearbeitung
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 2/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Kleben, Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen