Thingiverse
Calliope Pipe Tuning Plug
von RonaldWalters
3
Downloads
3
Likes
0
Makes
Popular Mechanics Dec 1982 construction article for a 25 note mini-calliope.
Calliope Tuning Plugs for 1", 7/8", 3/4" and 5/8" OD 1/16" wall aluminum pipe
*** Tips are gladly accepted and much appreciated. ***
Mini-Calliope Part 6 - Pipe Tuning Plugs & Jacks
https://youtu.be/4U84IxTTqpM
Mini-Calliope Part 12 - Pipe Tuning Process
https://youtu.be/oiF2LTt6MI8
The 1” and 7/8” plugs are threaded for 5/16-18 threaded rod.
The 3/4” and 5/8” plugs are threaded for 1/4-20 threaded rod.
Note: Print plugs with threaded end pointing down
Required o-rings listed below and are noted in the stl description for each tuning plug.
1” Tuning Plug uses 1.5mm x 19mm O-rings
7/8” Tuning Plug uses 1.5mm x 15mm O-rings
3/4” Tuning Plug uses 2mm x 12mm O-rings
5/8” Tuning Plug uses 0.375 x 0.5 O-rings
Calliope Tuning Plugs for 1", 7/8", 3/4" and 5/8" OD 1/16" wall aluminum pipe
*** Tips are gladly accepted and much appreciated. ***
Mini-Calliope Part 6 - Pipe Tuning Plugs & Jacks
https://youtu.be/4U84IxTTqpM
Mini-Calliope Part 12 - Pipe Tuning Process
https://youtu.be/oiF2LTt6MI8
The 1” and 7/8” plugs are threaded for 5/16-18 threaded rod.
The 3/4” and 5/8” plugs are threaded for 1/4-20 threaded rod.
Note: Print plugs with threaded end pointing down
Required o-rings listed below and are noted in the stl description for each tuning plug.
1” Tuning Plug uses 1.5mm x 19mm O-rings
7/8” Tuning Plug uses 1.5mm x 15mm O-rings
3/4” Tuning Plug uses 2mm x 12mm O-rings
5/8” Tuning Plug uses 0.375 x 0.5 O-rings
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
