Slicer Discord
Cam locking camera mount for quick release tripod – 3D-Druckmodell von MakerWorld MakerWorld
Other Hobby & DIY

Cam locking camera mount for quick release tripod

265 Downloads
28 Likes
185 Makes
Zum Modell
This is a replacement mount that connects to the bottom of a DLSR camera using a standard screw. Many other types of mounts such as go pro mounts with a screw could also be used with the base plate. This mount is used for quick release tripods that use tension with a cam on one side and an angled groove on the other to hold it in place. There are many of these generic tripods and the dimensions are not all the same. I started this project by remixing Ottonet's YATMo - Yet Another Tripod Mount, and then made a few alterations using basic tinkercad and calipers to measure my own tripod. The angles do not need to be exact to get a good lock. It took a few iterations, but the part is small so the cost of iteration is not too much, still less expensive then purchasing and hoping it fits. This include a 3D printed screw from the original YATMo model that works well with my camera. For heavy use you may want to invest in a metal screw of the appropriate size. If you are resizing the model, fi
Kategorie
Other Hobby & DIY
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen