Thingiverse
Engineering
Zum Modell
Cam with Rib
1
Downloads
1
Likes
0
Makes
帶肋凸輪即設計二凸輪輪廓，一為外輪廓，一為內輪廓。
尺寸：85 * 120 * 17 (mm^3)
輸出曲線：行程 15 mm，擺線輸出 150°，30°暫停
接觸面間隙：0.15 mm
Just try to design two cams which base circle diameter is different. Then you can get the cam with rib.
Dimensions: 85 * 120 * 17 (mm^3)
Output curve: 15 mm stroke，Cycloidal curve 150°，30° dwell
Contact plane clearance: 0.15 mm
Youtube: https://youtu.be/kDf4pQT-e2M
尺寸：85 * 120 * 17 (mm^3)
輸出曲線：行程 15 mm，擺線輸出 150°，30°暫停
接觸面間隙：0.15 mm
Just try to design two cams which base circle diameter is different. Then you can get the cam with rib.
Dimensions: 85 * 120 * 17 (mm^3)
Output curve: 15 mm stroke，Cycloidal curve 150°，30° dwell
Contact plane clearance: 0.15 mm
Youtube: https://youtu.be/kDf4pQT-e2M
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
