Camaro Hueforge

THIS IS PRINTED AT A .04mm LAYER HEIGHT Project: camaro 2.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.68mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #781f1c PLA Paramount 3D Iron Red Transmission Distance: 3 #de1619 PLA PolyTerra Lava Red Transmission Distance: 1 #00b1b7 PLA BambuLab Basic Turquoise Transmission Distance: 1.4 #f78e0e PLA PolyTerra Sunrise Orange Transmission Distance: 2.5 #ffffff PLA Default White Transmission Distance: 5 #f79dbc PLA Overture Pink Transmission Distance: 3.2This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #16 (0.76mm) swap to Blue Gray At layer #21 (0.96mm) swap to Iron Red At layer #22 (1mm) swap to Lava Red At layer #26 (1.16mm) swap