Camera Belt Clip

This is a plate that will attach your camera to your belt, the camera will snap in and can't get loos until you press the release button. The plate that will attach to your camera will also fit most tripods. It is super practical if you go hiking because you don't need to put your camera in a extra bag and you can get it ready in seconds. Feel free to ask any questions.

You will need:
- A Spring 16 x 5.5mm or 7/32 x 11/16'' (Note: Dont buy the one that is made for extruders they are too stiff)

- 4 M3 Thread inserts

- 4 M3 Screws, 6mm long

- Standart Camera thumbscrew with a long shaft (I used on that came with a Sachtler tripod)

- PETG or ABS Filament