Camera Enclosure Dome for using PTZ Camera outside

This enclosure allows you to use an inexpensive PTZ camera intended for indoor use outside. I designed the enclosure for the use of an Amcrest ProHD 1080P WiFi 2MP (1920TVL) Indoor Pan/Tilt Security Wireless IP Camera IP2M-841B or similar interior camera outside. It is designed to be hung upside down (to prevent water infiltration.) I have used it for several years with good results.

The camera can be PoE powered or using a 5v wall wart and connected via WiFi. (IMHO PoE is much more reliable.)

There is no opening for wire so that the user can decide exactly where the case needs to have the wire enter, so you will have to drill a hole for the wire in the side or bottom of the base.

The project consists of

a "Base" for mounting to the structure,
a "Camera Mounting Plate" for mounting the camera to the base and concealing any connections,
a "Camera Spacer" for raising the camera off the plate so that it is high enough to clearly view out the dome,
a "Dome Sleeve" for mounti