Thingiverse
Camera holder on microphone stand
par Findusdwarf
8
Téléchargements
8
Likes
0
Makes
Since normal camera tripods are too low, I have developed this camera mount for microphone stands. With microphone stands you can easily reach heights of up to 2m.
Additional parts needed:
- 1 nut M6 DIN 934
- 1 washer 6,4 DIN125 or similar
- 1 screw M6x40 DIN 933 or DIN 931
- Photo screw 1/4 "x16mm with knurl, https://www.fotoschraubenshop.de/produkte/1-4-fotoschrauben/1-4-sonderschrauben/
In the small base must be cut lengthwise a thread M10 or 3/8 ".
Additional parts needed:
- 1 nut M6 DIN 934
- 1 washer 6,4 DIN125 or similar
- 1 screw M6x40 DIN 933 or DIN 931
- Photo screw 1/4 "x16mm with knurl, https://www.fotoschraubenshop.de/produkte/1-4-fotoschrauben/1-4-sonderschrauben/
In the small base must be cut lengthwise a thread M10 or 3/8 ".
Findusdwarf publie également sur
75 modèles supplémentaires sur 2 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
