Thingiverse
camera stabilizer gimbal
par netpipe
34
Téléchargements
29
Likes
0
Makes
camera stabilizer remixed from https://www.thingiverse.com/thing:672295
bearings were moved to outside to allow better tightening and assembly without zip ties.
bearings are 4x 625z.
1 inch bolts with dab of hotglue on end of threads or some locknuts, diy can be made with vice and hammer with a smack. also use a jet lighter on the plastic if you have issues with the center ring getting the bearings in.
https://www.thingiverse.com/thing:84142 used the camera mount from here and there are some video's of another similar setup.
newer videocamera's like the sony hdr-cx240 series iirc have an automatic stabilizer in it that is actually very nice already.
bearings were moved to outside to allow better tightening and assembly without zip ties.
bearings are 4x 625z.
1 inch bolts with dab of hotglue on end of threads or some locknuts, diy can be made with vice and hammer with a smack. also use a jet lighter on the plastic if you have issues with the center ring getting the bearings in.
https://www.thingiverse.com/thing:84142 used the camera mount from here and there are some video's of another similar setup.
newer videocamera's like the sony hdr-cx240 series iirc have an automatic stabilizer in it that is actually very nice already.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
