Thingiverse
Camera&LED build plate mount
von Quadfather818
22
Downloads
15
Likes
0
Makes
Build Plate mounted camera and LED holder for MPSM V1&2. I included the GoPro Session mount I made for this, but any camera/mount can be used instead. Designed so everything can be printed on the MPSM V1&2. I supplied .stl files for everything you'll need to build and mount completed assembly EXCEPT
1. Quanty-2: M3 Bolts/Nuts. (If you don't have M3 supplies you can use 2 small Zip-ties instead)
OPTIONAL- I've noticed after a while the mount sometimes vibrates (especially if Y-axis belt is loose)
This can be solved by placing a piece of foam between mount and build plate, or do like i did and wedge a piece of scrap PLA in there as a shim ;)
Let me know your thoughts and ideas for any improvments!
1. Quanty-2: M3 Bolts/Nuts. (If you don't have M3 supplies you can use 2 small Zip-ties instead)
OPTIONAL- I've noticed after a while the mount sometimes vibrates (especially if Y-axis belt is loose)
This can be solved by placing a piece of foam between mount and build plate, or do like i did and wedge a piece of scrap PLA in there as a shim ;)
Let me know your thoughts and ideas for any improvments!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!