Slicer Discord
Camper Checklist – 3D printable model from MakerWorld MakerWorld
Sport & Outdoors

Camper Checklist

186 Downloads
133 Likes
34 Makes
Go to Model
I know that consumer checklists exist, and that they are easy/cheap to acquire. But lets be honest, we have printers and we use them to make stuff we could buy 99% of the time. I simply wanted a camping checklist for setup/breakdown. My kids can carry it around and help me as tiny, very bossy management. It's also a nice little reminder while getting things setup and torn down. Pretty straight forward. Simply print all the parts, set the sliders in the bottom plate, add superglue to the plate( avoiding adding too much near the sliders so it does ooze into the mechanism). Next, press the upper half in place. I suggest using a clamp or something to hold everything tight while the glue, dries. You should be able to sort it out pretty painlessly. You WILL notice I removed the viewing holes. The slide itself indicates red and green without needing to have reveal holes. Nothing else changed. There are also TWO blank spots where you can add your own line items! See that? I even hooked you
Category
Sport & Outdoors
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA
Post-processing
Gluing
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Trends ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection