Thingiverse
Can Crusher
por Laksemanden
13
Descargas
5
Likes
0
Makes
Simple Can crusher, Drawn in Solidworks, splitted to fit my dremel 3D45.
Lots of small washers and shims. Remember to scale model appropriately based on your material.
I used abs on arm sections 2.5% scale
PLA on shims washers and handle, 2% scale
PETG on main body and connector pins. 1.5% scale
screw holes made for m3 countersunk screws. Made drill size in pins M1.5 to give my wood screws something to chew into.
Used 30% infill on loadbearing parts. I.E PETG and ABS parts. PLA parts I gave 20% infill.
Lots of small washers and shims. Remember to scale model appropriately based on your material.
I used abs on arm sections 2.5% scale
PLA on shims washers and handle, 2% scale
PETG on main body and connector pins. 1.5% scale
screw holes made for m3 countersunk screws. Made drill size in pins M1.5 to give my wood screws something to chew into.
Used 30% infill on loadbearing parts. I.E PETG and ABS parts. PLA parts I gave 20% infill.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
