Can Cutter

Aluminum can cutter that uses a small (9mm) utility knife/box cutter blade. Can cutter clamp is used to hold can and establish the cut height. It also provides surface for the cutter to ride on as it is rotated around the can. The can cutter used 8-32x.5 countersunk screws and nuts to clamp blade it place. Loosen 1/4-20 Thumb screw and slip cutter over can. Tighten the thumb screw slowly while rotating the cutter around the can until can is cut.

STL files include an easily removable raft to help part adhere to bed during printing

We will use to create pin hole cameras to track the motion of the sun. https://www.instructables.com/Beer-Can-Photography/