Can lid/case

My school banned cans, so I made a workaround. It uses glue to piece together the top and mid section and the bottom is screwed on. The o-ring I used was 72mm OD, 66mm ID, 3mm.

https://www.amazon.com/dp/B0DHRSSWXG?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

print the top at 100% or the walls at 5-6 layers.
print the middle at 15% or higher with a wall of 4-6 layers.
Print the bottom at 15 or higher with a wall of whatever you want.