Thingiverse

Cancer Boxing Ring

by XtremeRob

14 Downloads

11 Likes

1 Makes

This print was done with supports on the boxing glove, 15 percent infill. The ropes are 1/8th inch dowel rods, painted to whatever color you choose. Everything fits together super tight, the holes in the corner post I used and 1/8th in drill bit to clean out the printed holes, and requires no gluing, just printing, painting and assembly. Thank you..

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 1/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Post-processing

Painting

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Cancer Boxing Ring?

Any FDM printer should handle Cancer Boxing Ring just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Cancer Boxing Ring need supports when printing?

Yes, Cancer Boxing Ring will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Cancer Boxing Ring available in?

Cancer Boxing Ring is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Cancer Boxing Ring free to download?

Yes, Cancer Boxing Ring is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Cancer Boxing Ring

Add to Collection