Canik Display Case

I wanted something to group all of the stuff together. I had 5 magazines and wanted to do something for that. This is a simple but nice model. I ran it with 1.75 Black Pla at 200 and bed set to 60. Original design mag holders were bad spacing and sub support for gun was a little sloppy. I respaced them to me more even and the hole for the mag I took 1mm off the inside space to get a little tighter but not where you take the whole thing with you. I thought the walls of the mag holders were a little small so I beefed them up. By taking the 1mm off the hole side to side I made the wall 1mm larger giving the holders a 2mm wall all around. Then, I made it gun holder 3mm larger and with the angle should take up the space. I also was able to add additional text with the model name. I set the text base to be a 5.2mm off the bottom. This should be where the system starts filling in the cover. I originally had it bedded down to 3mm. Run time is 16 hours 44 min to the cura slice. This was creat