Home Decorations & Ornaments STL Download - Capital Bookmarkby Crosslances

Our bookmarks are very simple. They are composed by two main parts: a flexible tab, and a top part with the decorative sculpture. The split tab can be inserted on the desired page so that you can't lose the mark. The sculpture will come out of the book nicely. All bookmarks can be printed in one piece flat directly on the printing plate. The only exception is the mimic bookmark, which consists of two pieces to be glued together. The tab can present some critical issues depending on the filament and infill and the number of walls you use in printing. you need to find a good compromise between flexibility and strength. In case it turns out to be too fragile or flexible our advice is to slightly scale the object in its entirety to 110-120%. In the opposite case where it turns out to be too stiff, our suggestion is to slightly lower (0.1-0.5 mm) the object under the printing plate to thin the tab, without scaling so as not to lose too much detail. For any needs crosslances remains at your service.