Capitan America

Project: capitanamericabueno.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 143.36x180mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA BambuLab Basic Brown Transmission Distance: 2 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Army Blue At layer #11 (0.96mm) swap to Brown At layer #17 (1.44mm) swap to Red At layer #20 (1.68mm) swap to Marine Blue At layer #25 (2.08mm) swap to Orange At layer #29 (2.4mm) swap to Beige At layer #34 (2.8mm) swap