Capra full size dig servo Mount

Got tired of burning up micro dig servos, So I designed these for my 3 Axial Capra's I'm running a 20kg standard size servo after setting the end points they work great on mine.
After printing the servo mount holes are to be taped 3mm that's all there is to be done to the mounts. I took an aluminum servo arm that comes with a 25kg servo drilled and tap the first inside hole for 4mm took a 4mm all thread rod cut to length so i could use a jam nut on top then put a piece of heat shrink tube on threads all done.
You will have to play with the length of the rod to make sure it doesn't go to deep as to hit on tranny. I used PLA and it's holding up great so far you can use what ever want.
Must install after you install skid into chassis