Captain America Prototype Shield from Deadpool 3

Mini version of the Captain America Shield seen in the Deadpool & Wolverine movie. The total height is around 32cm. Video guide added below There are two print profiles, one for silk filaments and one for normal filaments. The normal filaments print profile is faster but I recommend using silk to get a metallic effect. Filament colours used (all PLA): Black - Matte/StandardWhite - Matte/StandardRed - SilkBlue. - SilkSilver - SilkLight Grey - Matte/Standard (replace this with white if you don't have light grey)Grey - Matte/StandardDark Grey - Matte/Standard (use grey if you don't have dark grey) You will need the following items to assemble: Silver nut and bolts - buttonhead ideally:M3 30mm x 1M2 16mm x 3M2 10mm x 6M2 12mm x 5Black nut and bolts - buttonhead ideally:M2 10mm x 1M2 12mm x 8M2 20mm x 7Superglue (optional) Assembly Video:07:40 - IMPORTANT: Use M2 20mm bolts here (NOT M3). Do not over tighten these.Assembly Text: The assembly order is as follows, it can be quite fidd