Captain Rex Hueforge

Project: Captain rex.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 144.05x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Matte Dark Blue Transmission Distance: 1 PLA Bambu Labs Basic Cyan Transmission Distance: 3.7 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm), swap to Dark Blue At layer #12 (1.04mm), swap to Cyan At layer #14 (1.2mm,) swap to Blue Gray At layer #17 (1.44mm), swap to White for the rest.