Slicer Discord
Captain Rex Hueforge – 3D-Druckmodell von MakerWorld MakerWorld
Hueforge & Lithophane

Captain Rex Hueforge

46 Downloads
30 Likes
12 Makes
Zum Modell
This is my first attempt using Hueforge. LMK what you think of it. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x222.22mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2.4mm and the Actual Depth is 2.5mm Filaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Gray Transmission Distance: 2PLA BambuLab Basic Jade White Transmission Distance: 5PLA BambuLab Basic Blue Transmission Distance: 4PLA BambuLab Matte Marine Blue Transmission Distance: 0.5This print uses 6 unique filaments Swap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Blue GrayAt layer #8 (0.72mm) swap to GrayAt layer #11 (0.96mm) swap to Jade WhiteAt layer #14 (1.2mm) swap to BlueAt layer #22 (1.84mm) swap to Marine Blue for the rest.
Kategorie
Hueforge & Lithophane
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen