Captive

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size. You can change the X and Y but Z can remain the same.You may print at higher layer heights below the Min Depth of 0.48mmActual Depth is 4.5mm Filaments Used:PLA BambuLab Basic Black Transmission Distance: 0.3PLA BambuLab Basic Blue Gray Transmission Distance: 3PLA BambuLab Basic Red Transmission Distance: 5.5PLA BambuLab Basic Beige Transmission Distance: 8PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filaments. Substitute as needed. Swap Instructions:Start with BlackAt layer #17 (1.44mm) swap to Blue GrayAt layer #21 (1.76mm) swap to RedAt layer #27 (2.24mm) swap to BlackAt layer #31 (2.56mm) swap to BeigeAt layer #45 (3.68mm) swap to Jade White for the rest. Boost MeGot a Boost to spare? Every little bit helps the motivation. Thank you!MembershipWant to go commercial or maybe just show some love? Consider signing up to show support!