Caravan door holder

This is the locking wheel on the overhead locker doors of the caravan this causes them to catch and not move when driving. They had broken over the years and I decided to redo them all.

They are easy to print without supports.
You will need a few small screws M1 - M1.7 or so. You can get them on Aliexpress.
The instructions are simple:
- Print (important :-P)
- Place the wheel and screw the bolt in the center from side to side, the wheel has to roll and does not have to catch or brake with the bolt, so if you use bigger bolts make the wheel hole slightly bigger until the wheel is loose. (Note: Do not overtighten, just tighten enough so that the bolt does not protrude and block the wheel).
- 3 Place in the assembly and add a pen spring or other spring that fits inside the mechanism.

Greasing it is optional but can help, it still works. The harder the spring, the harder the lock will be.

Also the model is very faithful to the original, so if you only need the wheels becau