Card deck holder

Card deck holder for the table is a practical solution for organizing cards during games. The holder consists of modular elements that can be easily connected to accommodate multiple decks. Below is a detailed description and instructions for printing and assembly: Features: Modular Design: The holder is designed so that multiple modules can be placed next to each other. This allows the number of decks to be expanded flexibly. Each module holds one deck, which remains easily accessible. Easy Card Access: The slanted design of the holder allows for easy card removal. The cards are securely stored but can be quickly grabbed and placed back. Stability: The holder has a flat and stable base that sits firmly on the table and doesn’t slide, even during fast-paced games. Print Specifications: Material: PLA, PETG, or ABS, depending on your preference and use. Nozzle Size: 0.4 mm Layer Height: 0.2 mm for a good balance between detail and print time. Infill: 10-15%, which is sufficient for structural stability. Support: Not required, as the design is made to print without supports. Print Time: Approximately 1-2 hours per module, depending on print speed. Printing Instructions: Preparation: Load the model of the card deck holder into your slicer software and position it so the base is flat on the print bed. Select your desired material and set the recommended print parameters (see above). Printing: Start the print and ensure that the first layer adheres well to the print bed. Since the holder doesn’t have complicated overhangs, supports are not necessary. Post-Processing: Carefully remove the holder from the print bed after printing. If necessary, use sandpaper to smooth out sharp edges or any excess material. Expansion: To accommodate more decks, simply print additional modules and place them side by side. The modules are designed to fit seamlessly together. Usage: Card Games: The holder is perfect for games with multiple decks like Poker, Uno, Skat, or Magic: The Gathering.