Cardcaptor Sakura Circle - Hueforge

I made this with Hueforge CardCaptor Sakura Magic Circle Project: cardcaptor sakura circle.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 199.99x199.99mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Scarlet Red Transmission Distance: 2 PLA BambuLab Matte Sakura Pink Transmission Distance: 3 PLA BambuLab Matte Lemon Yellow Transmission Distance: 4This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #14 (1.2mm) swap to Scarlet Red At layer #21 (1.76mm) swap to Sakura Pink At layer #25 (2.08mm) swap to Lemon Yellow for the rest.