Thingiverse
Cargo Net Clips
por TheBudderNinja
2
Descargas
5
Likes
0
Makes
These are cargo net clips designed for 00-05 Pontiac Bonnevilles. They may work with other years and models, but that is not known.
These are designed to replace the factory push lock style cargo net clips, and these will screw/thread on instead. They do not print threaded, but should self thread easily with a nut driver, ratchet, or a very very light duty impact/drill.
The first head is 13mm, and the shank is 16mm, I used a hex here because I did have one of mine break on me and it was a pain to remove, so the hex should make it much easier if that happens.
The supports are built into the model, as long a you print with 0.2 mm layer height you should have no problems. These supports are designed to be 1 layer away from each surface, so your slicer may detect them as an overhang, but they have yet to fail for me and always remove super clean.
These are designed to replace the factory push lock style cargo net clips, and these will screw/thread on instead. They do not print threaded, but should self thread easily with a nut driver, ratchet, or a very very light duty impact/drill.
The first head is 13mm, and the shank is 16mm, I used a hex here because I did have one of mine break on me and it was a pain to remove, so the hex should make it much easier if that happens.
The supports are built into the model, as long a you print with 0.2 mm layer height you should have no problems. These supports are designed to be 1 layer away from each surface, so your slicer may detect them as an overhang, but they have yet to fail for me and always remove super clean.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
