Carnage Hueforge

Project: Carnage.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.64mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Paramount 3D Black Cherry Transmission Distance: 2 PLA PolyTerra Lava Red Transmission Distance: 1 PLA Overture Matte White Transmission Distance: 3.7This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #10 (0.88mm) swap to Black Cherry At layer #12 (1.04mm) swap to Lava Red At layer #15 (1.28mm) swap to White for the rest.