Case Feeder Plate

Case Feeder Plate - Fits RED reloading presses (and apparently Blue reloading presses said someone somewhere). also if you hate cases jamming up check out my wedge mod
https://www.thingiverse.com/thing:4294797

You will need

20 M3 hex nuts
12 M3x12 Socket Cap Screws
8 M3x8 Socket Cap Screw
2 M5x20 Flat Head Cap Screws
2 M5 Nuts
print 6 for large rifle repeat bases
print 5 repeat bases for all others

October 27, 2020
Large Pistol plates have been added. Please if you have the small pistol version, try one plate and see if it works, the holes are sized to accomodate 0.58" as per the charts with 0.02" clearance each side. Also increased the shell thickness for the bolt holes on the top

TEST UPDATE Large Rifle and clutch works,
I changed a few things as of April 10, 2020
-fixed some drawings errors
-enlarged the case port to include upto Lapua 338 (15mm wide+plate clearance, 75mm long)
-enlarged center hole to 8.5mm
-modified some bolt & nut sizes
-deleted groov