Case for a Network-Attached Storage – Flex Model

This is the second expansion module for my DAS case. It’s designed to sit on top of the 3D-printed DAS enclosure and accommodate an ITX motherboard, an Flex power supply, and a PCI card—all cooled by two 120mm fans. The module supports CPU coolers up to 100mm tall and provides space for a 2.5" SSD right next to the CPU.The ITX slot it's prepared to fit and HP P822 as this card it's out of the PCI specs, its taller. The DAS case and this expansion attach via magnets, ensuring a secure fit while still being easy to remove. There is also an opening on the bottom of the case so you can route and conceal your cables, giving the entire build a clean, minimalist look. Additional parts that you need 22x M3×5×4.2 inserts https://s.click.aliexpress.com/e/_DDHZoRd4x M3×10mm (for SSD mounting)4x M3×6mm (for motherboard)6x M3×10mm (top side)4x M3×6mm (top/bottom)8x M3 screws (fan width + 10mm length)17x Magnets (8×3mm) https://s.click.aliexpress.com/e/_Dec75HD On plate #5, there is a cu