Case for a Network-Attached Storage – SFX Model

This is the third expansion module for my DAS case. It’s designed to sit on top of the 3D-printed DAS enclosure and accommodate an ITX motherboard, an SFX power supply, and a PCI card, all cooled by two 120mm fans. The module supports CPU coolers up to 40mm in height and has space for a 2.5" SSD next to the CPU.The ITX slot is specifically prepared to fit an HP P822 card, which is taller than standard PCI specifications.Just like the original DAS case, this expansion module attaches via magnets, ensuring a secure yet easily removable setup. An opening in the bottom allows you to route and hide cables, maintaining a clean, minimalist look.Additional parts that you need22x M3×5×4.2 inserts https://s.click.aliexpress.com/e/_DDHZoRd4x M3×10mm (for SSD mounting)4x M3×6mm (for motherboard)6x M3×10mm (top side)4x M3×6mm (top/bottom)8x M3 screws (fan width + 10mm length)17x Magnets (8×3mm)https://s.click.aliexpress.com/e/_Dec75HD On plate #5, there is a custom front panel you can personali