Thingiverse
Case for BST900
por sascha9021341
5
Descargas
2
Likes
0
Makes
Optional: Reverse Voltage Protection Circuit with a N-Channel MOSFET
I recommend to use a heat sink if more than 7A input current is used over a longer period of time. I am using an IRF3205 mounted on a PCB and it is installed below the fan, doing 10A below 100°C.
Optional: Output switch
Since the converter does not fully turn off, I installed a relay on the output using the red LED to turn it on as soon as the converter is active.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bSwxNAOcOaH
I recommend to use a heat sink if more than 7A input current is used over a longer period of time. I am using an IRF3205 mounted on a PCB and it is installed below the fan, doing 10A below 100°C.
Optional: Output switch
Since the converter does not fully turn off, I installed a relay on the output using the red LED to turn it on as soon as the converter is active.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bSwxNAOcOaH
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
