Slicer Discord
Case for Compact Apple Magic Keyboard Touch ID – 3D printable model from MakerWorld MakerWorld
Electronics

Case for Compact Apple Magic Keyboard Touch ID

157 Downloads
27 Likes
103 Makes
Go to Model
Protective Case for Apple Magic Keyboard Touch ID. This is for the compact model, without the numeric keypad. Two versions are available. One with the fuzzy skin enabled and one smooth. The keyboard is supported within the case, preventing the buttons from touching the inside edge. The case is specifically for the version with touch id. For whatever reason, Apple changed the radius of the corners and so the older versions of the keyboard will not fit. A case for the full size version, with the numerical keypad, is also available - https://makerworld.com/en/models/1795616-case-for-apple-magic-keyboard-touch-id-and-keypad A trackpad case is available at - https://makerworld.com/en/models/1990538-protective-case-for-apple-magic-trackpad The tolerances are deliberately pretty tight so that the keyboard is held securely and doesn't shake around. I strongly suggest using either PLA or PETG. ABS will likely shrink while cooling making the case too small.
Category
Electronics
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Low confidence
Why?
very large print
Single piece May need scaling or splitting
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 3/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA, ABS, PETG
Min. bed size
300 mm (Extra large)
Post-processing
Sanding
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection