Thingiverse
Case for DP30V5A-L
par sascha9021341
2
Téléchargements
3
Likes
0
Makes
Case for DP30V5A-L.
Displays, buttons and LEDs need to be removed from the PCB and installed in the lid.
A version with detachable displays is available at aliexpress.
Parts:
3x3mm LED
4xTactile Push Button (6x6x5mm)
Some wire, 0.2mm isolated copper wire works well
If different LED colors are used, the installed 1K resistor can be replaced to match the brightness.
Red: 1.5K
Green: 300R
Yellow: 390R
SMD 0603 or 0805
Optional:
30mm 5V fan with delayed off switch. Reduces the temp. @5A from 70°C to below 50°C
2x2N2222
1x220uF cap.
1x100K resistor
1x560K resistor
3x1N4007
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gHetunFNTU5
Displays, buttons and LEDs need to be removed from the PCB and installed in the lid.
A version with detachable displays is available at aliexpress.
Parts:
3x3mm LED
4xTactile Push Button (6x6x5mm)
Some wire, 0.2mm isolated copper wire works well
If different LED colors are used, the installed 1K resistor can be replaced to match the brightness.
Red: 1.5K
Green: 300R
Yellow: 390R
SMD 0603 or 0805
Optional:
30mm 5V fan with delayed off switch. Reduces the temp. @5A from 70°C to below 50°C
2x2N2222
1x220uF cap.
1x100K resistor
1x560K resistor
3x1N4007
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/gHetunFNTU5
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !