Case for ElectroCookie Mini PCB Prototype Board

**If you print in the orientation provided, you shouldn't need supports.**

**Also included in the photos is my [Housing for the VL53L0X Time-of-Flight (TOF) sensor](https://www.thingiverse.com/thing:5320907).**

This case / project box is designed to fit the [ElectroCookie Mini PCB Prototype Board](https://www.amazon.com/gp/product/B081MSKJJX) is ideal for ESP8266 D1 projects.

* Use short [m2.5 screws](https://www.amazon.com/gp/product/B07CLQFQ4C) to attach the PCB to the case
* The smaller case hole is designed to accommodate a 2 pin [JST-XH](https://www.amazon.com/gp/product/B082234HSS) connector (power).
* The larger case hole designed to accommodate a 4 pin [JST-XH](https://www.amazon.com/gp/product/B082234HSS) connector (such as i2c).
* There are holes in the bottom that should accommodate #6 wood screws, in case you want to attach to something.

**Update 2022-03-18**
* Updated pictures.
* Revised model.
* Tighten lid tolerance a touch. The i2c cable conflicted a